by Maher Haddad | Jun 23, 2022 | Wireless v7
In this chapter I will be speaking about wireless tools that MikroTik provides to us. The 1st tool that I would like to speak about is the Wireless Snooper. This tool is very needed if you want to discover the wireless environment in your location. It can give you may...
by Maher Haddad | Jun 23, 2022 | Wireless v7
Another important tool that you may use espcially when working on outdoor Point-to-Point wireless, is the alignment. To align an antenna is to let it connected corrected to the outdoor wireless bridge so it gets an optimal signal level. You may have a case that you...
by Maher Haddad | Jun 22, 2022 | Wireless v7
In the last lesson, we spoke about the Frequency usage and we have seen that we can use it to select the frequency which is less noisy. MikroTik offers for us another way to find the less noisy frequency by using: Spectral Scan Spectral History Spectral Scan So...
by Maher Haddad | Jun 22, 2022 | Wireless v7
When working with Wireless on MikroTik, it is essential that you select the frequency that is less used (less noisy) to propagate your wireless service on it. Fortunately, MikroTik offers us tools to discover which wireless channels are less used to we can pick up one...
by Maher Haddad | Jun 19, 2022 | Wireless v7
We are still on the same LAB scenario. We can see that R2 is shown on the wireless registration table of R1: On R1, you can put a station in an access list. An access list is a place where you can define rules to a specific station. You can for example say that a...
by Maher Haddad | Jun 19, 2022 | Wireless v7
We are still in the same LAB scenario. Let’s go now to R1 and uncheck the default authenticate then check if R2 can still go to the internet: [mepr-show rules=”319″ unauth=”message”] So, I have removed now Default Authenticate on R1. Let’s see...
