by Maher Haddad | Feb 8, 2024 | Junos Associate
System Log (mainly called Syslog) is very important in Juniper devices as well as on any other brand. You have to think of syslog like in case someone broke his leg while doing skiing, then he goes to the doctor and the doctor sends him to the scan or MRI. Once the...
by Maher Haddad | Feb 8, 2024 | Junos Associate
I am going to do a LAB to show you how you can add, delete and rename and IP address on a Juniper interface. Let’s configure an IP address of 10.10.10.1/24 on the Ge-0/0/0 interface: root@Juniper# edit interfaces ge-0/0/0 unit 0 family inet [edit interfaces ge-0/0/0...
by Maher Haddad | Feb 8, 2024 | Junos Associate
During the previous chapters, we have seen that an interface has a name for example of ge-0/0/0. But why does it have this name and not something else? Well, there is a reason behind the naming of the interface on Juniper to look this way and in this lesson I am going...
by Maher Haddad | Feb 7, 2024 | Junos Associate
In this lesson, I will discuss about the different types of interfaces that are available on Juniper devices. You may have seen that when we were doing LABs until now that many different interfaces were shown when we do the command “show interface terse” from the...
by Maher Haddad | Feb 7, 2024 | Junos Associate
In many cases as a network engineer, you may require to make the same task on different places. For example: you want to change the speed on all interfaces of your router to 100 Mbps, or you want to provide a description to all LAN interfaces that they are LAN...
by Maher Haddad | Feb 7, 2024 | Junos Associate
Another important thing that I wish to explain to you in this chapter is the “Rescue configuration”. It is important always to have a “rescue configuration” which is a good version of your router configuration that you keep it saved in case something wrong went to...
