by Maher Haddad | Jun 26, 2022 | Wireless v7
In this lesson, I will explain to you about the MikroTik Wireless Chain. So what is a chain exactly? A chain is a place on the wireless radio when you can plug the antenna on it. It can be that a chain has an internal built-in antenna, or that you can plug on it an...
by Maher Haddad | Jun 26, 2022 | Wireless v7
In this lesson, I have to explain to you how you can change the wireless power on the AP but also on the station to the RX signal level is on its nominal level. A lot of people thinks that by just adding more power on the Wireless then the receiving signal will be...
by Maher Haddad | Jun 24, 2022 | Wireless v7
In this lesson, I will speak about the different frequency modes that we have on MikroTik wireless. There are 3 different modes which are: Regulatory domain Manual Tx-power Superchannel You can see them inside the Wireless settings over here: Each one of the modes has...
by Maher Haddad | Jun 24, 2022 | Wireless v7
From the last lesson (Wireless Scan), we have R2 connected wirelessly to R1. Say that for any reason, you decided that you wish to wipe the whole configuration that you have put on the wireless interface of R2, that means that you need to reset the whole wireless...
by Maher Haddad | Jun 24, 2022 | Wireless v7
In this lesson, I will explain the usage of the MikroTik Wireless Scan which is a new tool that can be used on the wireless. When we spoke about the wireless alignment, the idea was to align to the right AP. Now the idea is to connect the station to the Wireless AP so...
by Maher Haddad | Jun 23, 2022 | Wireless v7
In this lesson, I will explain another Wireless Tool that can be used which is the Sniffer tool. As you may know, Sniffer is to capture frame and to check them in a capturing software like Wireshark. This is something that also hackers do it when they want to hack a...
